High Performance Polymers

Ultrafuse® PET


General Information

Ultrafuse PET is made from a premium PET and prints as easy as PLA, but is much stronger. The filament has a large operating window for printing (temperature vs. speed), so it can be used on every 3D-printer. PET will give you outstanding printing results: a good layer adhesion, a high resolution and it is easy to handle. Ultrafuse PET can be 100% recycled, is watertight and has great colors and finish.


Benefits as a Glance

  • Watertight prints possible

  • Easy to print like PLA

  • High resolution prints


Material Properties

  • Tensile Strength (MPa): 17.2 (ZX), 33.4 (XY)

  • Flexural Modulus (MPa): 1826 (ZX), 1840 (XZ), 2063 (XY)

  • Elongation at Break: 1.1 % (ZX), 2.7 % (XY)

  • Impact Strength Izod notched (kJ/m2): 1.8 (ZX), 1.9 (XZ), 2.1 (XY)

  • Impact Strength Izod unnotched (kJ/m2): 4.1 (ZX), 7.7 (XZ), 12.3 (XY)

  • HDT @ 0.45 MPa: 63 °C


Material Properties

Chemical and Environmental Properties