Ultrafuse® PA6 GF30 is polyamide, reinforced with 30% glass fiber content. The fibers in this material are specially designed for 3D-printing filaments and are compatible with a wide range of FFF 3D-printers. The extreme stiffness and strength make this material highly suitable for demanding applications. Ultrafuse® PA6 GF30 has a good chemical and wear resistance. With its excellent layer adhesion and the low warping, it is
designed to be easy to use and suitable for a wide range of applications.

 

Benefits at a Glance

• Very high stiffness and strength


• Good chemical resistance


• Resistance to UV light exposure


• High wear resistance


• Excellent layer adhesion


• Works with Ultrafuse® BVOH

 

Material Properties

• Tensile Strength (MPa): 78,3 / 46,4 (XY), 14,9 / 12,2 (ZX)


• Flexural Modulus (MPa): 4694 / 2861 (XY), 8103 / 4300 (XZ), 2371 / 1070 (ZX)


• Elongation at Break: 2.2 / 3.2 % (XY), 0,8 / 1,9 % (ZX)


• Impact Strength Charpy unnotched (kJ/m2): 38,9 / 41,8 (XY) , 45,5 / 48,8 (XZ) , 2,2 / 3,1 (ZX)


• Impact Strength Izod unnotched (kJ/m2): 38,4 / 36,9 (XY) , 38,7 / 41,4 (XZ) , 2,6 / 3,8 (ZX)


• HDT @ 0,45 MPa: 110 / 114 °C